It can grow to be a problem to obtain a excellent seal on engines since several elements are of dissimilar metals with various expansion rates. To satisfy the requirements of such high-tech engines, modern gasketing chemical compounds are “job-specific”. The glue manufacturer designs each and every adhesive for a specific job . That being said, you will have to make sure that you select an adhesive that is certainly designed for your specific need; use as a high temperature gasket adhesive.

To remove the gasket and replace it with a new one utilizing adhesive:

Spray gasket remover on the surface or object that has adhesive on it. Gasket remover is actually a common glue-removing agent utilized to break down the glue. Read carefully to be sure that the remover won’t injury the alloy you are removing the gasket from.

Permit the gasket remover to stay on the surface for several minutes to break down the existing sealant. The period of time will fluctuate, but permit at least five minutes to provide the remover time to break up the glue. Do not permit it to dry however, then you’ll have to re-apply the remover.

Use a scraper to gently scrape away the glue and the gasket from the surface. Be mindful of the substrate you are scraping. Watch out to not injury the surface, as this may impede the seal.

Once you’ve removed the majority of the particles and glue, a residue-free brake cleaner might be sprayed on as a final cleanup to remove any remaining particles from the gasket adhesive.

Inspect your surface area. Check for pits, dents, and warpage. When the surface is warped too terribly, it’s advisable to replace the component. No quantity of adhesive is going to adhere a gasket to a severely warped surface.

Now that the surface is clean and totally free from sealant, place a thin bead of high temperature gasket maker adhesive to the actual gasket and mount it to the surface.

There’s no need to allow this cure a great period of time; a few minutes will probably be fine. You just really don’t want the gasket to slide off of the surface while you place the 2nd surface.

Finally place an additional thin bead of adhesive to the uncovered side of the gasket and place the final component against the gasket.

It’s also wise to utilize a threadlocker for the bolts that may hold the 2 surfaces against the gasket. This will guarantee that a ample amount of stress is being placed on the gasket.

For more information about Adhesive System’s high temp gasket adhesive or any other adhesives please contact us at 877.740.1250 x20. You can also send us an email at asisupport@instantca.com For general information about all of our adhesive products you can visit our website at www dot instantca dot com. If you don’t find exactly what you’re looking for, tell us about your application and we’ll help you find something that will work, or customize something specific for you.

Tags: , ,